Can I consider entrance lighting (light fixtures above the building entrance) a safety and comfort lighting? And therefore not to include it in the calculations?

In the version 2.0 of the Core and Shell system, and the old version of LEED Online, the template consists of two tables for EXTERIOR LIGHTING SYSTEMS:
1 - Lighting Power Density Tabulation...

In our project, the interior lighting wiring is under tenant scope of work, however the provision of luminaires are under the project scope. So, do we still need to consider the interior lighting...

The lighting designer of our project is asking if flood light under canopy or overhang, which shoots upward but they will make sure no upward light goes beyond the edge of the canopy/overhang,...

Our project is 3 CS buildings on a campus site in downtown Fort Worth, TX. Owner wants to erect a stage for periodic events which will occur after dark. These will be held in a central plaza on a...

The definition of sky glow in LEED is including the reflected light that enters the atmosphere. But in our lighting model (DiaLUX), the reflected light is not considered into the sky glow...

Please advise the definition of vertical footcandles. When measuring the vertical footcandles of the site boundary, at what distance level shall the calculation point be?

In our project (LZ3) we have a separate pedestrian route accessing the site. The local government requires the route to be sufficiently illuminated, which means that the...

Hi,
our project does not have any tradable surfaces and because of this the online pdf says that the SSc8 is not properly documented (data are missing in the tradable surfaces table)....

Please,

In the project our project team is working there are some fixtures next to the site boundary which emit illumination for the sidewalk next to the property limits. The streets...