Log in
Forum » Singapore
Topic

Open Plan office served by 4 AHUs

CI-2009 IEQp1: Minimum indoor air quality performance
posted by Michael Wahjudi on Aug 23, 2016, 10:19 pm

Hi all, we received comments from reviewer that requesting the system computation should be separated for each system. Our development consists of few meeting rooms and open plan offices. The...

Last reply: Dylan Connelly, Jan 23, 2017, 10:01 am

Project located in a building with a very low fresh air rate

Retail-NC-v4 EQp1: Minimum indoor air quality performance
posted by Valentin Grimaud on Oct 24, 2016, 11:29 pm

What if the project is located inside a 30-year old building with...

Last reply: Tristan Roberts, Jan 17, 2017, 4:15 pm

Blind

CI-v4 EQc5: Thermal comfort
posted by Ameet AA on Oct 17, 2016, 10:13 pm

Hi,

Can blind be considered as control for thermal comfort? Thanks.

Last reply: Tristan Roberts, Jan 17, 2017, 2:41 pm

Campus Thermal Energy Plant Submission

General forums
posted by Michael Wahjudi on Nov 22, 2016, 9:51 pm

Hi. We have LEED Campus Development with 2 LEED projects inside. Let's call it "Development F" and "Development A". Development F is housing the thermal energy plant, hence exception for option 2...

Last reply: Michael Wahjudi, Nov 28, 2016, 8:48 pm

Using Chilled Water Pump similar to ASHRAE 90.1

NC-2009 EAp2: Minimum Energy Performance
posted by Michael Wahjudi on Aug 16, 2016, 2:33 am

Hi, we have development where the Chiller Plant is serving three buildings. Due to of the distance of the building, the Chilled Water pump head is quite high and we required to install Chilled...

Last reply: Marcus Sheffer, Aug 25, 2016, 9:16 am

Tenant is installing the entire energy systems at the building

CS-2009 EAc5.2: Measurement and verification - tenant submetering
posted by Michael Wahjudi on Aug 4, 2016, 3:48 am

Hi all, we have building where the tenant is installing the entire energy related system (ACMV, lighting, etc). The landlord only provide land and structural of the building. Hence the total...

Last reply: Marcus Sheffer, Aug 5, 2016, 6:43 pm

ASHRAE 90.1 Table 6.5.3.1.1A VS Table G3.1.2.9

NC-2009 EAc1: Optimize Energy Performance
posted by Ameet AA on Jun 29, 2016, 11:02 pm

Hello,

I'm confused with the two tables. In Table 6.5.3.1.1A option 2, the limit is fan system input power; whereas in Table G3.1.2.9, the limit given by the same equation is brake horse...

Last reply: Ameet AA, Jul 10, 2016, 11:29 pm

Is Green Tag certification accpetable

CI-2009 IEQc4.5: Low-emitting materials - systems furniture and seating
posted by Shuchita Gupta on Mar 16, 2016, 4:25 am

Hi ,

I wanted to know if green tag ( an Australian rating ) acceptable instead of BIFMA / GREENGUARD , a furniture manufacturer which has greentag is claiming to us that LEED accepts this...

Last reply: Andres Schwarz, Mar 18, 2016, 3:26 pm

Prescriptive compliance

CI-v4 EAc2: Optimize Energy Performance
posted by Michael Wahjudi on Apr 15, 2015, 5:29 am

Can a project eligible for points under Base Building Systems - Building Envelope, Opaque and Building Envelope, Glazing if they can meet most of recommendations from 50% AEDG? Our...

Last reply: Tristan Roberts, Mar 16, 2016, 7:07 pm

Reclaim land for more than 40 years

NC-v4 MPR1: Must be in a permanent location on existing land
posted by Michael Wahjudi on May 19, 2015, 9:05 pm

"All LEED projects must be constructed and operated on a permanent location on existing land" from these statement. It is clearly indicate that LEED project at reclaim land is not allowed for...

Last reply: Tristan Roberts, Mar 16, 2016, 11:59 am