| Topic | Recent |
|---|---|
Separate Changing and Shower RoomsCS-2009 SSc4.2: Alternative transportation - bicycle storage and changing roomsposted by Tee Howard on Apr 30, 2017, 7:54 amMarilyn Specht Vice President & Managing Principal, US Sustainability Introba LEEDuser Expert 51 thumbs up May 3, 2017- 12:37 pm Hi Trina, Who told you to do that? My understanding is they do not require the changing room to be separate from the shower area. This is also discussed in the LEED CI-2009 SSc3.2 forum where it is confirmed you do not need separate rooms for the two. Log in or register to post comments ... Last reply: Marilyn Specht, May 3, 2017, 12:37 pm |
|
Sea Water Cooled Chiller ModelingNC-v4 EAp2: Minimum Energy Performanceposted by Sefa Sahin on Apr 26, 2017, 7:53 amMarcus Sheffer LEED Fellow 7group / Energy Opportunities LEEDuser Expert 5903 thumbs up April 26, 2017- 9:45 am I think this would be possible with some type of water cooled condenser. Without going into the program and trying to figure it out I can't give you a step-by-step set of instructions. For LEED if it can't be modeled directly a work around would be required. If it is required make sure to follow G2.5 and provide a thorough narrative describing the work around. You might also consider posting your question on the eQUEST users forum at onebuilding.org. Someone there would be more likely... Last reply: Marcus Sheffer, Apr 26, 2017, 9:45 am |
|
Baseline System 2NC-2009 EAc1: Optimize Energy Performanceposted by SSN Energy Model on Apr 16, 2017, 2:02 am
As per Table 6.8.1D, I observed the following Last reply: Marcus Sheffer, Apr 21, 2017, 10:48 am |
|
Baseline EER- System 2 PTHPNC-2009 EAp2: Minimum Energy Performanceposted by SSN Energy Model on Apr 13, 2017, 6:32 am
As per Table 6.8.1D, I observed the following EER = 12.3-(0.213*Cap/1000) EER Also, Cap means the rated cooling capacity of the product in... Last reply: Marcus Sheffer, Apr 21, 2017, 10:41 am |
|
Natural Ventilation Loads ModelingNC-2009 EAp2: Minimum Energy Performanceposted by Sefa Sahin on Mar 8, 2017, 9:17 am
Dear All, We are working on residential building in Istanbul/Turkey. The building is heated and cooled by radiators and split AC respectively. Residential units are not include any fan for... Last reply: Marcus Sheffer, Apr 21, 2017, 10:15 am |
|
aerosol paintsNC-2009 IEQc4.2: Low-emitting materials - paints and coatingsposted by Abdulla Anwar on Mar 1, 2017, 9:00 am
is there any requirements for aerosol paints? which might be used by construction team for marking junction boxes purposes (inside weatherproof). the question is there any criteria... Last reply: Debra a. Lombard, Apr 19, 2017, 12:35 pm |
|
System 2- LEED Fan Power ASHRAE 90.1.2007NC-2009 EAp2: Minimum Energy Performanceposted by SSN Energy Model on Apr 13, 2017, 2:07 am
Hi, Greetings! I am doing Energy Model for Labor Accommodation. I have some doubts and need your help, Baseline system will be system 2 as per ASHRAE 90.1.2007. Since, the... Last reply: Marcus Sheffer, Apr 13, 2017, 12:10 pm |
|
Arc PlatformPerformance Periodposted by Sarfaraj Khan on Apr 11, 2017, 8:45 am
Hi Last reply: Batya Metalitz, Apr 12, 2017, 10:45 am |
|
Reduced Parking Footprint CalculationNC-v4 LTc7: Reduced parking footprintposted by Sefa Sahin on Mar 30, 2017, 7:36 am
The project building is gallery, museum. Museum category is not included in the Table - Base Ratios for parking spaces, by building type. What is the best option for calculation it? Thank... Last reply: Marilyn Specht, Mar 30, 2017, 11:07 am |
|
TrucksNC-v4 LTc7: Reduced parking footprintposted by Tarek on Mar 27, 2017, 7:43 am
In a warehouse Project, for determining the actual parking capacity of the project, are the Trucks counting in the parking spaces ? Last reply: Marilyn Specht, Mar 29, 2017, 10:53 am |
