Post a question or comment
Filter by location
Forum
Topic
Replies
Recent
3
Architect
PF&A Design
LEEDuser Basic Member
11 thumbs up
Thu Apr 19, 2012, 7:14 pm

Fundamental Commissioning

General forums
posted by  Scott Bowman  on 

Following are some comments I would like to make to USGBC related to Fundamental Commissioning (and by reference to Enhanced): 1. The definitions seem very vague related to systems, by mentioning

4
LEED Fellow
7group / Energy Opportunities
LEEDuser Expert
4452 thumbs up
Thu Apr 19, 2012, 4:45 pm
5
Thu Apr 19, 2012, 4:18 pm

New equation and better definitions - Addenda August 2011

NC-2009 SSc7.2:Heat Island Effect—Roof
posted by  Susann Geithner  on 

A new equation to calculate credit compliance has been added. Base on a weighted average you now may also show credit compliance.

3
Thu Apr 19, 2012, 3:45 pm

Design Bike Racks- CS FFM, Germany

NC-2009 SSc4.2:Alternative Transportation—Bicycle Storage and Changing Rooms
posted by  Tobias Silies  on 

In the forum discussion I found the note the number of required bycicle parking spaces depends on the no.

2
LEED Project Reviewer certificate holder
LEEDuser Basic Member
76 thumbs up
Wed Apr 18, 2012, 10:08 pm

EAp2

CI-2009 EAp2:Minimum Energy Performance
posted by  Monika Mickute  on 

We recently purchased a 7,000 SF, 1-story office building for our own use. We are attempting LEED CI Platinum but are not touching the exterior walls or roof.

12
LEED Fellow
7group / Energy Opportunities
LEEDuser Expert
4452 thumbs up
Wed Apr 18, 2012, 9:16 pm

ACP

General forums
posted by  Angela Saggin  on 

Hi! I haven't seen if someone has already asked this, so if someone has done it, I'm sorry to be questioning again. When we choose the alternative compliance, it's also needed to complete the ori

2
Project Manager, LEED
USGBC
LEEDuser Premium Member
41 thumbs up
Wed Apr 18, 2012, 8:23 pm

Is there a time limit to submit for final final review

LEED Reviews: Appeals, Design/Construction Submittals, and more
posted by  Steve Khouw  on 

We have a project already passed the Design Phase review almost one year ago then the project was suspended during construction by the Owner for their internal reasons and recently restarted again

3
Wed Apr 18, 2012, 5:16 pm

Self-Declared compliance

Schools-2009 IEQc4.6:Low-Emitting Materials—Ceiling and Wall Systems
posted by  Alison Y Rivenburgh  on 

Has anyone had any luck submitting materials that are "self-declared" compliant from the manufacturer?

3
Wed Apr 18, 2012, 4:09 pm

Zone air distribution ventilation effectiveness

NC-2009 IEQp1:Minimum IAQ Performance
posted by  Maria Kutelova  on 

I need help with determining proper case for the Air Distribution Configuration per table per Table 6-2. The forth entry required a velocity of 150 cfm to be reached within 4.5 ft of floor levels.

2
Principal, Energy and Engineering Leader
DLR Group | Westlake Reed Leskosky
LEEDuser Expert
267 thumbs up
Wed Apr 18, 2012, 1:40 pm