Hi,
I am modeling a laboratory which has a small area of office space for LEED and wanted to check a couple of approaches:
1) The engineers have informed me that the lab has to be a...

What’s the best way to proceed with the energy model of the following case?
The building is a 4000m² manufacturing building where there is a small office area and a large high...

We've got an 11,000 square foot maintenance garage for trucks, modeling it under LEED and ASHRAE 90.1-2007. This is a tricky space.

It has more than 15 BTUH/SFT of heat so according to...

Hello!

I´m documenting a floor that is...

Our project includes a separate non-LEED certifiable building with no regularly occupied space and no...

Hai:-

Our project is sewing factory we already provide entryway mate and Exhaust as required, VRF system is used for A/c

1.Is it enough to attend this credit

2. Is...

The Design Preliminary Review has been completed on one of my projects and we have one query from EAp2 which appears unclear. It states that ‘heating equipment should be heat pumps in both...

Maybe a stupid question, but the v6 form under 2009 no longer has the table to fill in the space usage and instead says to upload the 'space usage calculator' available for download from the...

I am doing an ASHRAE 90.1-2007 PRM analysis. We have a DOAS CV laboratory design that has a requirement between 10-20ACH in lab zones and a room set point of 20degC.

The baseline system is...

For the EAP2 upload EAP2-14 LEED is asking for the modeling software "input summary." What specific input summaries are required for Carrier HAP? I am modeling a building over 100,000 sq ft. The...