Log in
Forum
Topic

Option 3, if no whole bldg. utility meter is installed?

NC-2009 EAc5: Measurement and Verification
posted by Sebastian Graba on Aug 4, 2011, 4:38 pm

How can I apply for Option 3, if my project doesn't a whole building utility meter installed? Our LEED building is located on a "campus". So the campus does have a utility meter installed.

...

Last reply: David Eldridge, Aug 4, 2011, 6:52 pm

Test method

NC-2009 IEQc4.3: Low-emitting materials - flooring systems
posted by Paola Figueiredo, Newton Figueiredo on Aug 3, 2011, 3:25 pm

Can a flooring system be tested using the latest version of CDPH test method and still comply to NC 2009?

NC 2009, option 2, demands that all flooring products meet the testing...

Last reply: Susan Walter, Aug 4, 2011, 3:12 pm

Feedback on 0.5 gpm faucets and recirculation loops

NC-2009 WEp1: Water Use Reduction
posted by Susan Walter on Aug 4, 2011, 2:22 pm

We're proposing 0.5 gpm faucts for a project and the client is demanding more information from other facilities on these faucets. Specifically he wants to understand the need for more...

Prescriptive Method- multiple VLT types

NC-2009 IEQc8.1: Daylight and views - daylight
posted by Dana Murdoch on Jul 26, 2011, 4:45 pm

Hi - I'm using the Option 2 - Prescriptive Approach for this credit, and I'm running into a few issues regarding the provided Excel spreadsheet. In a few of our rooms, we have regular height...

Last reply: Eddy Santosa, Aug 4, 2011, 2:14 pm

Grouping of spaces

CS-2009 IEQp1: Minimum indoor air quality performance
posted by Anupam Jain on May 24, 2011, 3:02 pm

I am working on a project with similar spaces repeating on each floor. I know LEED allows one to group spaces in some credits. However, the LEED online template says "Complete the following table...

Last reply: Jens Apel, Aug 4, 2011, 7:56 am

IEQc8.1 Daylighting Spreadsheet Calculator

NC-2009 IEQc8.1: Daylight and views - daylight
posted by Molly Jones on Aug 3, 2011, 3:55 pm

We are working on a project using the May 2011 version of the daylighting and views spreadsheet. We are using excel 2007 with macros enabled. The spreadsheet does not aknowledge the use of...

Carpet

EBOM-2009 MRc2: Sustainable Purchasing—Durable Goods
posted by Amy Bechard on May 4, 2010, 9:11 am

Where does carpet fit in? Carpet isn't listed, but is certainly can be a durable good. I'm wokring on an NCv2.2 project and considering using this credit as a basis for an ID credit. We are...

Last reply: Michael Chermak, Aug 3, 2011, 3:26 pm

Good or no?

EBOM-2009 WEp1: Minimum Indoor Plumbing Fixture and Fitting Efficiency
posted by Elizabeth Crenshaw Hammitt on Jul 20, 2011, 4:54 pm

The way I am interpreting this credit, it would seem that is the project was built post 1994, while a baseline can be calculated, there is no chance of not meeting the PR as long as a...

Last reply: Dan Ackerstein, Aug 3, 2011, 11:07 am

Cx for Domestic HW to Point of Connection- Sink only

CI-2009 EAp1: Fundamental Commissioning of Building Energy Systems
posted by Harvard University Green Building Services on Aug 3, 2011, 9:48 am

We have a project where a sink was added as part of the scope and tied into existing cold and HW supply lines, with no alteration to any other part of the domestic HW system. The...

Last reply: Scott Bowman, Aug 3, 2011, 10:51 am

Male vs. Female FTE

General forums
posted by Jennifer Berthelot-Jelovic on Aug 2, 2011, 6:22 pm

I am trying to complete PI FORM 3: OCCUPANT AND USAGE DATA. However, I cannot seem to find the location to enter the male to female ratio. How do you account for how many of the...

Last reply: Ben Stanley, Aug 3, 2011, 10:17 am