Log in
Forum » Credit Forums
Topic

Classifying Products

NC-2009 IEQc4.2: Low-emitting materials - paints and coatings
posted by Adolfo Silva on Feb 24, 2010, 10:03 am

Hello,

I'm working on a project and the...

Last reply: Mara Baum, Aug 23, 2010, 2:47 pm

Perplexing Reference Guide language for Table 1, SCAQMD Rule 111

NC-2009 IEQc4.2: Low-emitting materials - paints and coatings
posted by Mara Baum on Feb 8, 2010, 4:47 pm

2004. Please look into registering for LEEDUser (LEEDUser.com) where there are dicsussion forums that address inquiries such as yours."--Funny, I end up posting the answer to this question...

Last reply: Mara Baum, Aug 23, 2010, 12:47 pm

Supporting documentation for IEQ P1

NC-2009 IEQp1: Minimum indoor air quality performance
posted by Bob Richardson on Aug 12, 2010, 8:03 am

I'm working on a system with heat pumps and...

Last reply: Roger Chang, Aug 23, 2010, 9:20 am

Lighting requirements of Ashrae 90.1-2007

CI-2009 EAp2: Minimum Energy Performance
posted by Gahl Sorkin Spanier on Aug 20, 2010, 12:22 pm

Achieving the minimum Ashrea 90.1-2007 requirement for lighting power...

Last reply: John Bauer, Aug 22, 2010, 12:15 am

Underground Parking

EBOM-2009 SSc7.1: Heat island effect - nonroof
posted by Drew Wenzel on Aug 2, 2010, 4:50 pm

I'm working on a project where about 75% of our parking is located under the building itself. The LEED manual says there is "no...

Last reply: Jacob Arlein, Aug 20, 2010, 5:57 pm

Re-calibration & corrective action

NC-2009 EAc5: Measurement and Verification
posted by Jenny Stadelmann on Aug 20, 2010, 2:27 pm

Does the re-calibration of the as-built design energy model and the baseline model need to be done monthly during the 12 mos. M&V period, and then corrective action taken monthly based on how...

Last reply: Marcus Sheffer, Aug 20, 2010, 3:15 pm

restaurant equipment

CS-2009 EAp2: Minimum Energy Performance
posted by Diana Wellenbrink on Aug 18, 2010, 11:14 pm

Should future restaurant equipment be enluded in the calcs?

Last reply: Marcus Sheffer, Aug 20, 2010, 3:08 pm

open space requirement

NC-2009 SSc5.2: Site development - maximize open space
posted by Matthew VanSweden on Aug 19, 2010, 11:50 am

in a...

Last reply: David Posada, Aug 20, 2010, 2:25 pm

Lighting and Equipment controlled by BMS

CS-2009 EAp2: Minimum Energy Performance
posted by Diana Wellenbrink on Aug 18, 2010, 11:19 pm

What is the corret way of calculating lighting and equipment controlled by Building Management System?

Last reply: Marcus Sheffer, Aug 20, 2010, 2:20 pm

Roof space under the perforated panel

CS-2009 SSc7.2: Heat island effect - roof
posted by Grace Ming on Aug 17, 2010, 11:43 pm

Hello all,

Above the concrete roof of the project, there are the steel...

Last reply: Mara Baum, Aug 20, 2010, 1:53 pm