Our particular project consists of a 400sqm 1 floor "Box" (walls and roof) to be built in its entirety inside a much larger existing warehouse, which itself is part of a large industrial complex...

Dear Leeduser.com members, who could explain where exactly should the outdoor air delivery monitor should be located? Only at the outdoor intakes? Before the filter media or after the filter...

Hello,
We are aiming to achieve all 6 credits under enhanced...

I have a LEED project where they plan a storm water tank that will be a shared one with two other buildings next to the LEED project building. How can the share of our LEED project building's...

According to ASHRAE 90.1-2010, paragraph 9.6.2, an additional interior lighting power is allowed for the following categories:

a) Decorative lighting (up to 1W/ft2)
b) Merchandise...

This project is located on Regent Street, which is a very famous, historical shopping street in London. Due to the heritage nature, the design guidelines for the facade of all stores along this...

We have a small retail unit with no toilet access for customers. There are public toilets near by, but we have no relationship with the company that owns them, so I do not think we would be able...

I have a water based primer sealer that the client is looking to use in order to fix artwork to the walls throughout their floors. The technical sheet for the primer dictates that the...

Our project seeking C&S certification for and existing building redevelopment. We are providing bikes and changing facilities within the building and a...

If solar panels on our building‘s roof are serving another building‘s energy needs, can we still exclude these solar panels from calculations as mechanical equipment?

I.e., our building...