we have steel doors that will have a very nasty primer put on in the shop that has carbon black, formaldehyde, cobalt based chemical and other nasty stuff. The mfgr provided a (M)SDS for a touch...

Hello there,

what would the requirements be for non-composite...

We are a...

Hi there,

the credit requires:

Both first-party and third-party statements of product compliance must follow the guidelines in CDPH SM V1.1 -2010, Section 8. Organizations that...

For a project that has a glass fiber water tank inside the weather barrier in a utility space (not a working space), do we need to get a...

The LEED guide states the following: “Building products must be tested and determined compliant in accordance with California Department of Public Health (CDPH) Standard Method v1.1–2010, using...

Has anyone had luck in locating CPHv1.1-2010 tested (or alternately Green Guard Gold certified) operable / folding (CSI Division 10) partitions?

As a general observation, I am concerned...

Hi,

I am not finding any info to suggest a maximum...

The Definition of interior/exterior in the LOW-EMITTING MATERIALS credit is a bit confusing for me. What is exaclty defined as a waterproofing membrane or air- and water-resistive barrier...

According to the LEED v.4 credits, it is possible to use different emission tests outside the US to comply with the requirements.

AgBB and DiBt testing method (2010) are mentioned there....