Log in
Forum » Bangladesh
Topic

Energy modeling for LEED project (v3) requirement or not

LEED Rating System Selection
posted by al-emran hossain on Feb 27, 2016, 3:12 pm

We are going to start LEED project (Gold, points 66) in RMG factory at Bangladesh , if we will not consider in energy modeling for v3, that will accept or not , and required then which energy...

Last reply: Saud Abdul Rasheed, Feb 28, 2016, 12:28 am

2 year 24 hour design storm

NC-2009 SSc6.1: Stormwater design - quantity control
posted by ABDUL MUTHALIB MOHAMED on Dec 16, 2015, 8:04 am

December 16, 2015- 1:28 pm You do not have enough data to discern anything from what you have posted. What you are trying to do is not easy, and is well outside the scope of this forum. I suggest you read...

Last reply: Omar Elrawy, Dec 20, 2015, 7:55 am

Water Efficiency Calculation

NC-2009 WEc2: Innovative Wastewater Technologies
posted by ABDUL MUTHALIB MOHAMED on Dec 19, 2014, 8:07 am

Hi,
My project is a factory building. They are installing only Indian Water Closets and no Urinals. How to calculate water efficiency if Urinals are not used? Can we give flow rate as 0 and...

Last reply: Tristan Roberts, Nov 27, 2015, 2:36 pm

Factory Area Classification

NC-2009 IEQc2: Increased Ventilation
posted by SAMY Chamy on Jul 20, 2015, 10:34 am

We have Projects in Bangladesh
1.It have sewing area, Workspaces in which category we classify it (Ashrae 62.1)

1.Sewing Area
2.Cutting Area
3.Inspection area

i...

Last reply: Jon Clifford, Jul 27, 2015, 8:38 pm

Hi all,

NC-2009 EAp2: Minimum Energy Performance
posted by Visu Boj on Apr 14, 2015, 5:57 am

I am working on a certification for a factory having less than 5 percent conditioned area. My process load is also high upto 75 percent. Can any one suggest me how to get savings in optimize...

Last reply: Visu Boj, Apr 17, 2015, 1:03 am

Water Efficiency Calculation

NC-2009 WEc3: Water Use Reduction
posted by ABDUL MUTHALIB MOHAMED on Dec 30, 2014, 11:44 pm

Hi,
My project is a factory building. They are installing only Indian Water Closets and no Urinals. How to calculate water efficiency if Urinals are not used? Can we give flow rate as 0 and...

Last reply: Maria Rozatti, Mar 2, 2015, 5:59 pm

VOC limit for acrylic based industrial enamel paints

NC-2009 IEQc4.2: Low-emitting materials - paints and coatings
posted by ABDUL MUTHALIB MOHAMED on Jan 20, 2015, 4:41 am

The project is a 2 storied garment factory located in Bangladesh where they use Industrial Enamel alkyd based paints which has a...

Last reply: Jon Clifford, Jan 20, 2015, 8:45 pm