I tried to register project using the BLOCK. How shall i remove the TEST building project from the block? As the cost of that building is also included when I click payment.
It shows the id...

I am a LEED AP and a “newcomer” in the certification process. As AGMBC Guidelines are not clear to me, I went through the forum comments below but I am totally confused now. Please help with the...

at the EBOM EQ 1.1 forum hasn't gotten a response yet, but you might try again there. See Jason Franken's comments on I-Beam from Oct. 2010 that are relevant. Hope this gets you started- post back...

Hello,
I am working on the possible LEED Certification for a master planned community with around 8,000 units. Would it be possible to prototype certain model homes, have them certified,...

I have read too much! More confused now.
I am working on a university campus. We have 2 sets, of 3-4 unconnected buildings (housing) with very similar floor plans that are basically side...

I can see that group certification (AGMBC Part II) is now available. However, a note on the USGBC website mentions:

"Until functionality is available in LEED Online to certify group...

sorry for the repeated posting but i had embedded a similar query in another comment previously posted on this page:

we have a query on one of our projects (an industrial project), with a...

I am working on a project where two buildings directly adjacent to each other but separated by 10-20 feet are being designed to be connected by an underground tunnel. At the surface these...

Hi
I am working on a School Academy using the NC2009 for School & 2010 AGMBC guidelines. The campus consists of 5 main buildings and 1 FM building and1 Energy centre. I was wondering...

I'm working on project where there are three buildings (main building and two other support service building) in the same site. Project owner is only interested in obtaining LEED certification...