hello Marcus,

i am currently designing a navy lodge and it is 66,420 sq ft.its a Four floor building with 12 guestrooms on each floor about 900 sq. ft each.

we have solar panels...

We have one unique boiler, that feeds two buildings inside the LEED boundary of the hotel.

Must we do two energy models, with two set of input/output reports? Or can we do a unique energy...

We are developing a building energy modeling of a residential building based on 90.1-2007.

The dwelling units have exterior areas (balconies) that have luminaires.

These luminaires...

Hello.
I am working in a Multifamily LEED Project.
The building has 75 Dwelling, Parking, Gym, Audience/Seating Area, Bar & Dinning Area, Corridor...

I would like to use...

Dear all,
I am stuck with an error from eQUEST. We have defined the proposed building and when we want to perform the compliance analysis the baseline is not generated and the analysis is...

Hi,

We're working in a project trying to achieve this credit by option 3 (measurement).
Our façade is an existing curtain wall. There are two different skins. The exterior one has...

I am looking for a Green Rater for a multifamily project in Europe. Anyone ? Would not mind getting trained as a Green Rater myself in the process...

Hi,

we are certifying a new C&S building, in v2009.

The version of Ashrae 90.1 to follow is 2007? Or do we have to change to 2010?

Also, do you know if Trnsys is an...

Hi,
this may be a silly question, but I do not know if there is any special requirement o detail that force me to start a project following CS v4 instead CS 2009. Is CS 2009 obsolete? I...

Hello,

We hace just received the preliminary review comments for a Data Center. We used the Minimum Energy Performance Data Center Calculator spreadsheet in order to define the IT Server...