Our Design Team is asking to the Contractor to track and collect...

If we decide to move a pavilion from Expo area to a new site, shall we take any "Building...

In a swimming pool removing latent heat is necessary all the year round.
For the baseline model, if I model the heat recovery according to G3.1.2.10 Exhaust Air Energy Recovery (50% both...

Does "Electricity meters must record both consumption and demand" mean that both...

Does water meter for fire emergency counts as additional meter for process water? In our project a tank is filled with water coming from municipal facility. Do you think that metering that kind...

Marcus Sheffer LEED Fellow 7group / Energy Opportunities LEEDuser Expert 5867 thumbs up June 30, 2017- 9:57 am This is probably not the best place to ask software specific questions about how to model something. You can try BLDG-SIM at onebuilding.org or some of the other discussion forums or the Energy Plus help desk. If the software can't model your system directly then you would need to employ a work around. If you do so for LEED you must follow the exceptional calculation method and ideally base your work around on something that has been published. Often manufacturers of equipment...

Hi all,
I need to model water humidification section of air handling unit.
The software I was using is Design Builder + Energy Plus, that don't have the possibility to insert a water...

Our project refers to an addiction and renovation to an existing airport terminal (only building and a limited outdoor area).
As requested by the footnote can we consider only traffic...

Hello,
we are working on a project that intended to install solar panels on the roof but there isn't much room left for them.. The owner has several solar panel fields in the region (more...

hi all,
we are doing a feasibility study on a CS major renovation project located in South Italy. HVAC (that was substituted 7 years ago) and envelope (that do not need to be upgraded)...