Log in
Forum
Topic

demonstrating compliance

General forums
posted by Tristan Roberts on Sep 29, 2010, 10:41 pm

I would agree that you can demonstrate compliance with those credits for just the one occupied space.

WEp1 LEED Online form

General forums
posted by Tristan Roberts on Sep 29, 2010, 10:52 pm

In the WEp1 form, the Pl3 numbers are shown, but then you can enter your own numbers that may reflect more specific project conditions, like yours.
The following note appears in the LEED...

Special Circumstances

Living with LEED Online - quirks, bugs and hiccups
posted by Cara Mae Cirignano on Sep 30, 2010, 10:22 am

Hi Jean -
Information in the special circumstances section is never required - so it shouldn't affect whether or not Y appears. If you check the 'special circumstances' box, however, the...

Re: Audit Requirements

General forums
posted by David Posada on Sep 30, 2010, 2:37 pm

The LEED review process has moved away from auditing selected credits in greater detail as was practiced under NC 2.1. The LEED Review teams continue to ask for clarifications as part of the...

Re: Green Cleaning Costs

General forums
posted by David Posada on Oct 4, 2010, 11:19 am

It could depend on alot of factors - but take a look at
http://www.pjs.com/cms/...

Re: What LEED rating system to use?

General forums
posted by David Posada on Oct 4, 2010, 11:52 am

Case 1 sounds like NC, Major renovation. Case 2 would likely be NC if the remaining 70% is to be occupied by the owner in the future, since they will control the build-out. If that remaining...

Option 2 for MPR #6

General forums
posted by Seonhee Kim on Oct 5, 2010, 5:00 pm

If option 2 is selected, it asks owner to report the energy and water consumption data via Energy Star's Portfolio manager's "Import Facility Data Templates." However, this form states "You must...

ready-mix plants

General forums
posted by Tristan Roberts on Oct 5, 2010, 9:59 pm

Depends on whaty you're looking for, but I think there's a lot of variation in ready-mix plants.
Why do you ask? Looking for something particular?

Re: What System to Use for Industrial Existing Buildings

General forums
posted by David Posada on Oct 8, 2010, 12:28 pm

We faced similar questions for a project that got certified under NC, but in your case CI may make the most sense.

We had several communications with the USGBC (this was pre-...

LEEDuser resources

General forums
posted by Tristan Roberts on Oct 11, 2010, 11:00 am

Hi Summer, since you're here on LEEDuser can I assume you've checked out the templates and other resources here? If not, check the Documentation Toolkits for IEQc4 and MRc4–7. (For example,...