Topic | Recent |
---|---|
Zinc Rich PrimerNC-v4 EQc2: Low-emitting materialsposted by LEED Pro Consultant on Jan 29, 2019, 6:39 pm
Hi, We are working on a project that intends to apply a zinc-rich primer whose concentration is below 340 g/L (According to California Air Ressources Board). The volume is so low... |
|
Entryway systemsNC-v4 EQc2: Low-emitting materialsposted by Charline SEYTIER on Nov 20, 2017, 1:16 pm
Hello everyone, Are entryway systems included in flooring category? It is unclear in the reference guide. Thanks!! Last reply: Christine Chow, Jan 29, 2019, 12:30 pm |
|
CDPH v1.2 (2017)NC-v4 EQc2: Low-emitting materialsposted by Kristen Magnuson on Jun 22, 2017, 5:17 pm
Does the USGBC accept products that have been tested for emissions in accordance with CDPH v1.2 (2017) for compliance with the low-emitting materials credit? This is the newer version of CDPH v1.... Last reply: Elizabeth Kertesz, Jan 28, 2019, 11:13 am |
|
Materials inside the buildingNC-v4 EQc2: Low-emitting materialsposted by Konstantina Kalliakoudi on Jan 23, 2019, 3:18 am
Hello to all, In my understanding this credit "Low emitting materials" concerns materials inside the building, and not outside. Is this right? Thanks |
|
Furniture always in scope of work?NC-v4 EQc2: Low-emitting materialsposted by Raphael Sperry on Jul 9, 2015, 2:45 pm
I've noticed that the LEED reference guide says "Furniture is considered part of the scope if it is installed at the time of occupancy, regardless of who specified or provided it." And I've... Last reply: Sophie Kerr, Jan 22, 2019, 7:20 pm |
|
How does EPA Method 24 compare to CDPH Standard Method v1.1-2010?NC-v4 EQc2: Low-emitting materialsposted by Summer Gorder on Jan 17, 2019, 7:10 pm
We finally found a Static Control Epoxy Coating for a concrete floor that meets the... Last reply: Reinhard Oppl, Jan 18, 2019, 4:21 pm |
|
Budget Calculation Method- can Option 1 be used for the other categories where all products are compliantNC-v4 EQc2: Low-emitting materialsposted by Summer Gorder on Jan 17, 2019, 6:23 pm
I have never had to utilize the Budget Calculation Method for compliance using my GBIM verification system, but have one category that may not comply for a large public project pursuing LEED... |
|
Polyurethane upholstery foamNC-v4 EQc2: Low-emitting materialsposted by Emily Purcell on Jan 15, 2019, 5:03 pm
Hi, I posted recently about how to address built-in seating assembled on site (the answer is, it is part of a wall... Last reply: Debra a. Lombard, Jan 17, 2019, 11:38 am |
|
Intumescent Paint and General Emission Evaluation requirementsNC-v4 EQc2: Low-emitting materialsposted by Michael Munn on Nov 9, 2016, 4:31 pm
Do the General Emissions criteria for Paints and Coatings apply to intumescent flame retardants for structural elements? We've had difficulty finding products that meet (or report) compliance.... Last reply: Craig Wilson, Jan 15, 2019, 7:41 pm |
|
Clarify the requirement for offsite coatings (and/or coating that will be covered)NC-v4 EQc2: Low-emitting materialsposted by Summer Gorder on Jan 10, 2019, 3:07 pm
The team as me to clarify the definition of Primers, Sealers, and Undercoaters in the LEED description? Does that include any coating that gets covered with an additional... Last reply: Craig Graber, Jan 10, 2019, 4:30 pm |