Hi!

Can I use 62.2-2010 instead of the 62.1-2010 ventilation rate calculation procedure for dwelling units? The project is a 4-story apartment building? Thanks. Hope you can help me. 

Do you have to have...

Question: Is it necesary to hard duct ventilation air into each bedroom within the apartment? Or...is it adequate to provide all of the required ventilation for that apartment in one location (ie...

Hello, 

I was under the assumption that the IEQp1 calculator should only include densely occupied spaces, but I'm having trouble finding any documentation around which spaces should be...

We have a 6 storey addition to an existing 4-storeyed building. The mechanical systems for the addition are separate from the existing systems. The project is going for LEED v4 CS certification...

Dear All,

I’m currently modelling a building that uses DOAs with air-side heat recovery for space ventilation in the Proposed Design. As per ASHRAE 90.1 – 2010, section 6.4.3.9...

Hi,

In what concerns outdoor airflow monitoring requirements for a...

Hello everyone,

Are there any alternatives for complying CIBSE AM10 requirement for narrow plan? Our project will have a building width that is greater than 15m by almost 4m even with the...

In Europe which parameters shall be considered to establish whether the site is non-attainment area for PM2.5?

Hello Everyone,

I have an office floor that is conditioned by a Fresh Air handling Unit (100% Outdoor Air) with Heat Recovery and in some enclosed office spaces we have Fan Coil Units (FCU...