Ok so I get a comment from the LEED reviewer asking for cutsheets of the lighting fixtures to back up the strategies I'm pursuing for the Lighting Quality section of this credit.  I need to ask,...

Ok so I get a comment from the LEED reviewer asking for cutsheets of the lighting fixtures to back up the strategies I'm pursuing for the Lighting Quality section of this credit.  I need to ask,...

"For all regularly occupied spaces, meet one of the following requirements:  

1. Use light fixtures with a luminance of less than 7,000 candela per square meter (cd/m)2 between...

So how should one pursue the prescriptive method for this prerequisite?  In the sample form, it says to provide documentation demonstrating compliance with ASHRAE 90.1-2016, Sections 5 though 9...

So according to 2010 ASHRAE 90.1, there is no...

Hello all,

Our project team is currently pursuing this credit and was able to achieve it through door hardware manufacturers such as Sargent, McKinney, Norton, Pemko and CECO since they...

Do areas with ground level landscape count towards any of the calculations? 

Also, I have area that is just ground, no landscape or hardscape is that excluded from the calculations?

3, 2023- 2:54 pm Hello Dave.  Thanks again for providing that information.  However, when I checked the forum for the LEED v4.1 version of this credit, people were still saying someone only with a LEED...

I have a CI project for a Library.  The team is looking to pursue prescriptive compliance for this credit.  The issue is when attempting to complete the AEDG table, I don't know which category...

How should I calculate the Fan CFm and power for Baseline LEED Model, Autosize the baseline system , then use Q=mCpDeltaT to calculate fan CFM and then find out the HP and use pressur adjustment...