Under LEED EBOM...

We have a meter that measures: chiller + pump + lighting system.

Since we are not discriminating by "end use": would this meter qualify towards this credit?

Thanks

GH

Hi all, I'm confused about when OR over what period of time does the breakdown need to capture. I understand that it needs to roll up to the EAc1 declared annual energy use (mbtu). Does that mean...

Our project building has central air-handlers, which provide heating and cooling for the tenant spaces i.e. heating and cooling by air only. Do we need to install airflow meters in each tenant...

If we had to meter things like hot water usage and chillers on a building level to comply with EAp2/c1 to do building-level metering of all incoming energy inputs, would we automatically be able...

Does anyone have any experience with tenant sub-metering and compliance with this credit? The sub-meters will be arranged to monitor the lighting and plug load energy use of each suite...

Our project team is working on LEED...

I am wondering if a commercial building, where over 90% of the building is submetered tenant space would qualify for this credit. There are separate submeters for the tenants plug load/lighting...

Hello,
I've got a doubt about the time that we should develop the breakdown of energy.
The guide says: "This analysis of major energy-use categories must have been conducted within 2...

For natural gas metering applications, is continuous logging of instantaneous flows a requirement? Most meters just put out totalized pulses, so I'm assuming that's fine...

Any thoughts?...