Log in
Forum » NC-2009 IEQp1
Topic

Ventilation rates in garages

NC-2009 IEQp1: Minimum indoor air quality performance
posted by Maria Porter on Sep 27, 2011, 9:42 am

My projects can follow the Ventilation Rate Procedure in ASHRAE 62.1-2007, sections 4 through 7 without bigegr problems. The only thing that is difficult is that we have garages under the...

Last reply: Agnieszka Rylska, Feb 1, 2019, 8:43 am

Single Zone Ventilation Calculation

NC-2009 IEQp1: Minimum indoor air quality performance
posted by Boggarm Setty on Jul 31, 2018, 1:06 am

We have a project which has an big roof top lounge served by RTU, the same unit serve adjacent corridor & storages so this is basically an single zone system with no...

Last reply: Andrew Mitchell, P.E., Jul 31, 2018, 8:02 am

Ventilation calculation square footage boundary

NC-2009 IEQp1: Minimum indoor air quality performance
posted by Melissa Mikulka on Jun 15, 2018, 4:40 pm

We have a project that contains a recycle bin storage area within a corridor.  Do the exhaust calculations have to include the entire corridor space or can we designate an area around the recycle...

Last reply: Melissa Mikulka, Jun 18, 2018, 10:15 am

ERV and multiple fan coil units

NC-2009 IEQp1: Minimum indoor air quality performance
posted by Courtney Royal on Mar 26, 2018, 11:33 am

Hello, I've only completed the ventilation spreadsheet a few times and have a few questions. Thanks!

The project has an Energy Recovery Unit which feeds multiple ducted fan coil units...

Last reply: Gustavo De las Heras Izquierdo, Jun 11, 2018, 6:38 pm

Fresh air provision- Garment factory building

NC-2009 IEQp1: Minimum indoor air quality performance
posted by Aravindraj RB on May 9, 2018, 1:15 am

Our project is a garment factory building (G+5), having majority floor area as production unit which is mechanically ventilated. The office & meeting areas in the whole building is less than...

Last reply: Dave Hubka, May 9, 2018, 9:04 am

Dwelling Unit Ventilation

NC-2009 IEQp1: Minimum indoor air quality performance
posted by Boggarm Setty on Apr 3, 2018, 2:25 am

Hi, we are working on a residential building and filling out "Minimum...

Last reply: Andrew Mitchell, P.E., Apr 3, 2018, 4:38 am

IEQp1

NC-2009 IEQp1: Minimum indoor air quality performance
posted by Adi Negara, LEED AP BD+C on Aug 27, 2013, 8:47 am

Hello,

Our project is to build a two-story office building in Indonesia. For cooling, the building will be served by AC using VRF system (ceiling cassette) in each designated space that...

Last reply: Dionisio Franca, Mar 7, 2018, 7:48 pm

Fuel tank room exhaust

NC-2009 IEQp1: Minimum indoor air quality performance
posted by Manuel Martin Delgado on Feb 26, 2018, 3:13 am

Hello,

We are designing a building with an underground fuel tank room for back up electricity generator. Should this fuel tank room meet any of the exhaust rates from ASHRAE 62.1? Under...

Last reply: Dionisio Franca, Mar 6, 2018, 8:03 pm

The correct/latest 62MZ & LEED min. IAQ spreadsheet?

NC-2009 IEQp1: Minimum indoor air quality performance
posted by Aru Sau on Dec 5, 2016, 11:07 am

Is "v2009v4_Minimum...

Last reply: Hernando Miranda, Feb 5, 2018, 2:18 pm

Ventilation requirements for a freeze box and cold box

NC-2009 IEQp1: Minimum indoor air quality performance
posted by Frantisek Macholda on Oct 26, 2017, 4:54 am

Hello everybody,

we have project of a medium size food supermarket. Two cold boxes and one freeze box are used for temporary storage of food. The boxes are cca 200 - 500 sf each and they...

Last reply: Frantisek Macholda, Oct 27, 2017, 5:59 am