Project: 3-story student housing in Danville, KY

We are attempting to fill out the "Multiple Units" tab on the TRANE-provided calculator.  The file defaults to 6 columns of possible...

We are trying to pursue enhanced refrigerant management  credit for our project which is a manufacturing facility. There are some R410a air condition systems for the office, but majority of the...

Hello,

I am working on a New Construction project - a community center, certifying under LEED v4. 

I am pretty new with LEED projects and trying to identify whether the HVAC systems...

Hello,

I am working on a New Construction project - a community center, certifying under LEED v4. 

I am pretty new with LEED projects and trying to identify whether the HVAC systems...

The refrigerant used on my project is not listed in the LEEDv4 form and as recommended on the FAQ section for this credit I am using the LEEDv2009 form to document compliance.

When I...

Hi

To caluclate the Rc-value we need to know the amount of refrigerant and the cooliing capacity. As LEED v4 puts it:

Rc: Refrigerant Charge
(0.065 to 0.65 kg of refrigerant...

Hello all, 

I'm working on a manufacturing facility that is looking to go for this credit. I have included all HVAC (rooftop units, VRFs, etc.) as well refrigeration systems for a "Cold...

We are working on a major renovation project that contains several split system AC units which will be replaced.  The owner doesn't have any record of the refrigerant volume that was charged for...

Are refrigerant GWPr and equipment life (years) typically shown on cutsheets, or are default values sufficient for this credit?

The closest I've seen is a calculator from Trane:...

Hi!
My project has a heat pump, Nibe F1345, and no cooling. The heat pump contains refrigerants, more than 225 g (3.4 kg each). So I should account for them in this credit, right? However,...