Hi!

Is there a different alternative to providing individual thermal comfort controls for each workstation in open areas? assuming that the HVAC design is divided by thermal zones, so it...

Hi,

I would like to know if the definition of "work surfaces" includes only the surfaces of the workstations, or if it also includes any other surface such as: cassuals...

Hello everyone.

I'm a bit confused with the Percent of Occupants calculation on the Water Use Reduction Calculator.

We only have one model of toilets and dry urinals.
I...

Should I include on the TSLA the credits listed on the CS Appendix 4 with compliace "In Scope" or only those ones in which I selected compliance through "Tenant sales and/or lease agreement"?....

Hi All,

Is it possible and if so, how would you justify savings in plug and process loads for an interior fit out energy model vs baseline? Can you claim a percentage reduction if

...

Hi everybody.

I'm working on a commercial interiors project located on the 9th, 12th, 14th & 15th floor.

I'm trying to identify the regularly used exterior entrances to the...

Hello,

We have a project in the city of Mexico, the parking is underground with a very special feature, it is robotic, the user will place it in the basement 1 on a platform and from there...

Dear all,

We're working on a LEED v4 NC project in Mexico.
I am referring to Exceptions to 9.4.1.2b of standard ASHRAE 90.1-2010, where the automatic lighting shutoff control can be...

Hi everyone.

We are working on a zero lot line site where an old building was demolished in order to start with the new one.
The old building was composed only by hardscapes.
...

Hi everyone.

I'm a bit confused about how to document the different credits, due to the way I should fill the forms.

In summary, we achieve a 32% reduction on potable water use by...