Log in
Forum » Healthcare-v2009 MRc4.2
Topic

ROhS Directive

Healthcare-v2009 MRc4.2: PBT source reduction - lead, cadmium and copper
posted by Gustavo De las Heras Izquierdo on Feb 27, 2014, 8:32 pm

Is the ROhS Directive a valid approach for demonstrating the cable meets the credit requirements?

Please check this out: http://www....

Last reply: Aury Hathout, Nov 11, 2023, 9:01 pm

Lead-free Paints

Healthcare-v2009 MRc4.2: PBT source reduction - lead, cadmium and copper
posted by Catherine Blakemore on Sep 20, 2013, 4:24 pm

Am I understanding this credit correctly to mean that paints are to have zero (0) content of lead....EPA standards are not acceptable, correct?

Last reply: Stewart Whitcomb, Nov 6, 2020, 5:18 pm

Faucets of Medical consult

Healthcare-v2009 MRc4.2: PBT source reduction - lead, cadmium and copper
posted by Victor Moreno on Feb 15, 2018, 5:47 am

The faucets of Medical consult (Exam-treatament space) are considered for water intended for human consumption?

Thanks

Lead-free waterproofing floor slabs

Healthcare-v2009 MRc4.2: PBT source reduction - lead, cadmium and copper
posted by VICTOR MORENO on Jul 19, 2016, 4:41 am

In LEED Healthcare Reference Guide specifies...

Provide the source of data

Healthcare-v2009 MRc4.2: PBT source reduction - lead, cadmium and copper
posted by Matt Luedders on Apr 4, 2016, 12:40 pm

Under the lead section, the credit language includes the requirement to "Upload lead documentation. Provide the source of lead and/or cadmium data..."
And under the cadmium section, the...

Medical gases

Healthcare-v2009 MRc4.2: PBT source reduction - lead, cadmium and copper
posted by Gustavo De las Heras Izquierdo on Jun 19, 2014, 12:21 am

When reading the credit literature it seems very clear to me that the requirements for copper pipe applications exclude medical gases such as N2, O2, ozone, vacuum..etc

Is there any...

Last reply: Susan Walter, Jun 20, 2014, 10:10 am

Re: RoHS directive

Healthcare-v2009 MRc4.2: PBT source reduction - lead, cadmium and copper
posted by Kai Starn on May 7, 2014, 12:39 pm

Hello, correct me if I'm wrong but the foregoing discussion showed us that RoHS testing for lead in electrical wire and cable does not meet the credit intent. My experience has been manufacturers...

Heavy metals in paint

Healthcare-v2009 MRc4.2: PBT source reduction - lead, cadmium and copper
posted by Kai Starn on Sep 24, 2013, 2:53 pm

How have other projects documented this credif if paint products do not participate in Green Seal certification? Will the heavy metals such as cadmium, lead, mercury, antimony, and hexavalent...

Last reply: Susan Walter, Oct 1, 2013, 2:55 pm

here is another post from the older LEED-HC forum

Healthcare-v2009 MRc4.2: PBT source reduction - lead, cadmium and copper
posted by Tristan Roberts on Dec 11, 2012, 2:41 pm

Q:    In regards to the following statement, as part of the MRc4.2 requirements:
    "Specify and use electrical wire and cable with lead content <300ppm" (pg. 189)
    1. Can...

post on old forum

Healthcare-v2009 MRc4.2: PBT source reduction - lead, cadmium and copper
posted by Tristan Roberts on Dec 11, 2012, 2:36 pm

Before LEEDuser set up these credit-specific Healthcare forums, there was a general Healthcare forum on which this MRc4.2 question was posted. I am reposting the Q&A here for convenience:...