Hello everyone,
I have a dilemma regarding a core and shell v4 project whose only energy source is electricity: the manual says that it is possible to calculate core energy consumption...

Our project will add a building to a large existing master planned area. Our scope of work will add new drought tolerant plantings and irrigation to our small part of the bigger site, but there...

Hi,

By following the Multifamily Energy Model Simulation Guidelines, lighting in dwelling unit spaces shall be modeled as lit for 2-3 hours per day; so, we distributed these hours ...

Hi,

I have two questions:

1. According to ASHRAE std. 90.1 2016 Table G3.1.6 Lighting, "Interior lighting power in the baseline building design shall be determined using the...

Hi there,

The project I am working on is a commercial office space located in Sunnyvale, CA. Being located in the Bay Area, BART and VTA service more than exceed the maximum number of...

Hello All, 

I was trying to register a WELL v1 project but wellcertified website "Start your project" shows only option for v2 projects. Is the v1 version of the WELL rating system no...

Hello!

I represent a Solid Waste Management company often subcontracted to divert wastes from LEED projects. I have a silly question regarding Option 1. Diversion (1–2 points)...

I am working on a project with many small buildings connected to each other , some of the very small rooms may be designed with free fresh air entering through fresh air grilles not fans , is...

Has USGBC provided any documentation guidance for this credit? I recall seeing something buried somewhere on the USGBC website, but I can't find it now

Dear all,

We have been told by LEED coach that under cooling condition, the VRP calculation should use minimum Vpz for zone, and use the design maximum Vps for system, but if all VAVbox's...