| Topic | Recent |
|---|---|
FTE Calculations & ApplicationEBOM-2009 WEp1: Minimum Indoor Plumbing Fixture and Fitting Efficiencyposted by Austin Evans on Jun 16, 2011, 8:51 am
I'm having a hard time understanding what I should actually use here to put in the online forms for... Last reply: Jenny Carney, Jun 22, 2011, 4:30 pm |
|
Plumbing fixture 'renovation'?EBOM-2009 WEp1: Minimum Indoor Plumbing Fixture and Fitting Efficiencyposted by Michael Miller on Jun 22, 2011, 1:26 pm
If pre-1993 plumbing fixtures are still in place (i.e. the bowls), but their flush valves have been replaced post-1993, does that count as 'plumbing renovation' / fixture replacement for the... Last reply: Jenny Carney, Jun 22, 2011, 4:28 pm |
|
LEEDuser plumbing assessment template updatedEBOM-2009 WEp1: Minimum Indoor Plumbing Fixture and Fitting Efficiencyposted by Tristan Roberts on Mar 22, 2011, 4:06 pm
To all LEEDuser members using our Water Efficiency Economic Assessment Policy for WEp1: we have made a couple minor updates to it to improve it... Last reply: Xun Jia, Jun 22, 2011, 4:27 pm |
|
What happend if the result of SEP on GHG emission is "N/A"EBOM-2009 EAc6: Emissions Reduction Reportingposted by David Feregrino on Jun 16, 2011, 1:37 pm
Hi, I used the EPA's manager Program, and the result for... Last reply: Jenny Carney, Jun 22, 2011, 2:56 pm |
|
PE Stamp on SEPEBOM-2009 EAc6: Emissions Reduction Reportingposted by Carrie Bradley on May 3, 2011, 3:18 pm
EAc1 and EAp2 don't require a PE seal. Is it really required on the SEP submittal for this credit? The guidebook says the SEP "requires confirmation by a validated professional engineer." This... Last reply: Jenny Carney, Jun 22, 2011, 2:54 pm |
|
MRc2: VOC standard questionLEED for Homes (LEED-H) Forumposted by Philip Herriges on Jun 22, 2011, 1:15 pm
On the table for Environmentally Preferable Products (Table 1 in the reference guide for MR2), under Roof AND floor AND wall for the insulation component, which version of the California "... Last reply: Kyle Anders, Jun 22, 2011, 1:52 pm |
|
Sharing the Portfolio Manager facility profileEBOM-2009 EAc1: Optimize Energy Efficiency Performanceposted by Carrie Bradley on May 3, 2011, 3:15 pm
LEED EBOM v2009... Last reply: Carrie Bradley, Jun 22, 2011, 10:16 am |
|
Weather file for September 21 not typicalSchools-2009 IEQc8.1: Daylight and views - daylightposted by Caroline Kilbane on Jun 22, 2011, 8:19 am
I am using sketchup and Daysim for daylight simulation for a school project. My results give me daylight levels for every hour, every day of the year. The results are abnormally low on Sept 21... Last reply: TODD REED, Jun 22, 2011, 9:38 am |
|
Regularly occupied spacesCI-2009 IEQc8.1: Daylight and views - daylightposted by kelvin duen on Jul 28, 2010, 1:28 pm
Would the lobby to the office constitute as a regularly occupied space? Last reply: TODD REED, Jun 22, 2011, 9:04 am |
|
Multiple buildings under 1 LEED-NC 2009 projectLEED Guidance for Campuses and Multiple Buildingsposted by Mark Meaders on Mar 10, 2011, 5:43 pm
I have a LEED-NC 2009 project that was registered in June 2010 (before the 2010 AGMBC was published). It is a 3-building project on part of a larger campus. The buildings are owned by a municipal... Last reply: Carly Ruggieri, Jun 21, 2011, 3:27 pm |
