Forum

Topic	Replies	Recent
I was under the impression General forums posted by Bill Swanson* on Aug 3, 2011, 8:48 am* Bill, for those of us reading this forum who get the car metaphor, but don't know anything about BUG ratings, is there any chance you could summarize your key suggestions here in easy-to-grasp terms?... Last reply: Bill Swanson, Aug 29, 2011, 11:02 am	10	Bill Swanson LEEDuser Expert Sr. Electrical Engineer Integrated Design Solutions Mon Aug 29, 2011, 11:02 am
LEED Certification for Phase wise construction General forums posted by Ramesh Narayanan* on Aug 29, 2011, 6:33 am* Nadav Malin President BuildingGreen, Inc. LEEDuser Moderator 834 thumbs up August 29, 2011- 10:06 am I've responded to this question in the MRc4 forum. Please continue the conversation there. Log in or register to post comments ... Last reply: Nadav Malin, Aug 29, 2011, 10:06 am	1	Nadav Malin LEEDuser Moderator President BuildingGreen, Inc. Mon Aug 29, 2011, 10:06 am
Development footprint exceeding previously developed General forums posted by Ricardo Sobral* on Aug 28, 2011, 8:11 am* LTprerequisite1- Case 1- What happens is the new development footprint exceeds the previously developed portions of the site?	0
% of annual rainfall treated? NC-2009 SSc6.2: Stormwater design - quality control posted by Kash Boodjeh* on Aug 22, 2011, 3:06 pm* The reference guide states that "90% of the avg annual rainfall is equivalent to treating the runoff from 1" of rainfall for a... Last reply: Gregory Hurst, Aug 26, 2011, 6:09 pm	1	Gregory Hurst LEEDuser Basic Member Office Manager Robert Peccia & Associates Fri Aug 26, 2011, 6:09 pm
Parking Lighting not through Building Elect Service NC-2009 SSc8: Light Pollution Reduction posted by Michelle Rosenberger* on Aug 26, 2011, 4:56 pm* My project puts a new community center on an existing masterplanned campus. My LEED boundary includes new and relocated parking that serve the new building and are part of my project team's scope...	0
LEED CS 2009 LEED ENERGY MODEL CS-2009 EAc1: Optimize Energy Performance posted by John Harrington* on Aug 24, 2011, 5:14 pm* My proposed system is a WSHP. However, the heat from electric exceeds the heat used from boiler in the WSHP loop. I would condiser the primary heating source in this building to be... Last reply: John Harrington, Aug 26, 2011, 4:45 pm	2	John Harrington LEEDuser Basic Member Fri Aug 26, 2011, 4:45 pm
ASHRAE/eQuest question- external blinds and SHGC requirement CS-2009 EAc1: Optimize Energy Performance posted by Agnes Vorbrodt* on Jul 17, 2011, 12:09 pm* Hello, In a CS office building we specified... Last reply: Marcus Sheffer, Aug 26, 2011, 3:14 pm	1	Marcus Sheffer LEEDuser Expert LEED Fellow 7group / Energy Opportunities Fri Aug 26, 2011, 3:14 pm
Can 10' requirement be met by a combination of mats? Schools-2009 IEQc5: Indoor Chemical and Pollutant Source Control posted by Renee Shirey* on Aug 26, 2011, 2:58 pm* Due to space constraints, our vestibules were not able to be a full 10' wide between our doors, thus the recessed walkoff mats aren't 10'. Does anyone see any issue with supplimenting the... Last reply: Allison Beer McKenzie, Aug 26, 2011, 3:03 pm	1	Allison Beer McKenzie LEEDuser Expert Architect, Director of Sustainability SHP Leading Design Fri Aug 26, 2011, 3:03 pm
Peak Demand Reduction Credit NOT Demand Response Pilot-Credits EApc8: Demand response posted by Debra Lombard* on Aug 26, 2011, 1:15 pm* HI Everyone, I am working on a LEED-NC v2.2 project which is small but has three technologies that reduce...	0
Accumulating Annexes Living with LEED Online - quirks, bugs and hiccups posted by Paola Figueiredo, Newton Figueiredo* on Aug 26, 2011, 1:08 pm* The credits seem to be accumulating annexes, for example, after uploading an annex in the templates for the SS 4.1 credit, it appears later in the following credits as an upload, even for...	0