I have a bungalow unit (single Storey hous) with 3 bedrooms. And each bedroom opens to a Zen Garden of Native plants using a Sliding Glass Door. My question is, are they going to consider the...

Hi, we have a DOAS system in the design and our baseline system is Sys#8,...

How do you deal with exception (b) to G3.1.1?

Do you apply a single-zone system (1) to spaces that have a COOLING or HEATING PEAK LOADS that differ more than 31.2 W/m2 to other spaces...

Dear Everyone,

I got a comment for one of our project which in my opinion is not ccompatibe with ASHRAE. We do not have much time for the response, so I decided to ask about it here.

Hi, i went though all the comments on this forum and cannot really find a clear answer to the question i have when i read the sentence: "any individual energy end uses that represent 10% or more...

I have been advised that the TSI Dust-Trak DRX can now be used for the particulate measurements.

Has anyone used this successfully (gained certification)?

Is it acceptable to use...

Hi everyone!

Hope you're doing great.

I'd like to ask if the following EPD fulfills the requirement of Type III EPD PS with external verification?

Thanks a lot!

...

Hi all,

We are working on a v4 Hospitality project which consists of various single-storey bungalows. Would you please advise on which ASHRAE Standard should be used? Would that be 90.1 or...

The interior lighting of our projects has 3 zones for dorm rooms, but has dimming with manual on/ automatic off controls. There are also daylight zones. Can the dimming meet the 3 lighting levels...

I am currently computing the elevators' energy consumption in the baseline according to Table G3.1, section 16. After assessing the total peak elevator motor power per car, as Design Builder (...