Hello everybody,

Regarding the Baseline Service Water-Heating System, both Table G3.1.1-2 in Standard 90.1 - 2016, as well as the statements in Table 3 "Changes in ASHRAE 90.1 Performance...

What is the best way to resolve errors with the v4.1 MEPC? The "Quality Assurance Checks" tab is reporting values which are inconsistent with the "Performance Outputs" tab due to which other...

For a project within warm Climate Zones 0 to 3A, and that has a "metal shop" space that requires more than 15,000 CFM, is it a correct reading that the baseline system serving those spaces shall...

My factory project has cold storage (10oC) and a freezer (-13oC). For the factory, we use ASHRAE 90.1-2016 as normal but for the cold storage and freezer, what is the standard to set up the...

Can I assume that my 40% energy savings is also 40% in...

Hello everyone,

According to ASHRAE 90.1-2010 and 2016 the following assumptions are described for the Baseline path definition (Appendix G):

1. Building Envelope is defined as...

in the forum. Thank you all in advance! Log in or register to post comments Tyler Thumma 7Group LEEDuser Expert 66 thumbs up September 5, 2024- 7:59 am Correct. This is because ASHRAE 90.1-2016 Appendix...

Hi everyone,

I'm currently performing a PRM assessment of an Office building. ASHRAE 90.1 - 2016 has condensed in its appendix G all prescriptive information to model the Baseline building...

Hi!

We are currently discussing a design solutions for the HVAC in a project that should fulfill LEED requirements. 

The discussion is ongoing wether we should have a...

5903 thumbs up July 5, 2024- 10:30 am Your question is not appropriate for this particular forum. From an energy perspective such an air cleaning device would be considered a process load and simply...