I have difficulty filling out the Minimum...

How to provide a narrative to explain how the worst-case condition was determined considering the total design airflow rate at the condition analyzed

This project is in California, and ventilation rates comply with Title 24. We have an unoccupied electrical room that is served by a fan coil system which recirculates air at 650 cfms/sf, however...

I am using an old 62MZ calculator file to do comply with the IEQp1 prerequisite.  However, after adjusting the ventilation rates for peak heating mode, Ev cannot be calculated on the spreadsheet...

Dear LEED community,
we are working on a project in Berlin, Germany. The existing building is a logistics center consisting of a logistics and warehousing facility made up of 3 units (48,...

I have submitted minimum indoor air quality performance pre-requisite for final design review and reviewer ask me for a narrative but I do not find any option for upload the narrative or any...

The new calculator (v2009v4_Minimum...

I recently received a Design Review comment advising that the...

After adding all the values for four floors I'm working on, I then input the design OA intake flow for each floor's...

Hi all, we received comments from reviewer that requesting the system computation should be separated for each system. Our development consists of few meeting rooms and open plan offices. The...