The language of the Pilot Credit now requires Communications (data cabling). 

We'd like to pursue this PC on our projects where we have already developed a WBLCA, so that we can take...

Member 521 thumbs up August 29, 2024- 1:42 pm Thanks to both of you. Yes, I was looking at the v4.1 language due to your comment Dave on the forum about the 10' distance. The language reads to me like...

Greetings.I am working on a project for a previously certified LEED community college campus (circa 2010). Our project consists of three buildings one of which is an existing...

The 2024 update to LEED v4 splits the points into energy cost (site/source) and...

Good day

I am working on projects in Estonia and we are trying to achieve the requirement for Opt 2 of this credit by choosing 5 materials from 3 different manufacturers.

During my...

Good afternoon everyone,

We are working on a LEED BD+C NC certification project in Brazil and have identified adhesives and...

I have a project attempting EAp2/c2 via the prescriptive pathway, Option 2, 50% AEDG.  The only "required documentation" listed in the Reference Guide is the completed AEDG tables, which seems...

I have a question from our Electrical Engineer that I am unsure on. 

Our building has several small service buildings at the rear of the property. We understand that we need to include...

Hi All,

Is it possible and if so, how would you justify savings in plug and process loads for an interior fit out energy model vs baseline? Can you claim a percentage reduction if

...

Hello,
Under EAc1 my understanding is that the energy model will use a baseline assumption for plug loads. Would it be possible to introduce a plug load energy reduction program as an ID...