| Topic | Recent |
|---|---|
Enhanced Refrigerant Management QueryEBOM-v4 EAc8: Enhanced Refrigerant Managementposted by padma priya on Mar 7, 2024, 4:16 am
We have a VAM Chiller, and we indicated "none" as the refrigerant type because in VAM chillers, water serves as the refrigerant, resulting in zero OWP and... Last reply: Dave Hubka, Mar 9, 2024, 11:42 pm |
|
Commissioning near end of constructionNC-v4 EAp1: Fundamental commissioning and verificationposted by Nadia Azzam on Mar 7, 2024, 10:37 am
We have been handed over a project aiming for LEED Gold that was delayed due to COVID and previously managed by a different LEED admin who has since left the company. After reviewing the... Last reply: Dave Hubka, Mar 8, 2024, 9:33 am |
|
Lighting Zone for a Terminal BuildingNC-v4 SSc6: Light Pollution Reductionposted by Gustavo De las Heras Izquierdo on Mar 15, 2023, 8:46 pm
Hello, We are certifying the Terminal Building in a new international airport. We wonder how to categorize the project, since lighting zones are not well defined. A Terminal Building needs... Last reply: Afogreen Build, Mar 7, 2024, 3:33 am |
|
100% nonportable water for cooling towerNC-v4 WEc3: Cooling tower water useposted by Thomas Tran on Feb 13, 2019, 4:08 am
Hi, LEED reference document says in the Required document Table (page 309): - Nonportable water analysis (if use 100% nonportable water) -------------------------------------- 2... Last reply: Afogreen Build, Mar 7, 2024, 3:24 am |
|
Partial Floor LEED CertificationCI-v4 MPR3: Must comply with project size requirementsposted by Edgar Arevalo on Mar 7, 2024, 12:14 am
I have a project that is a partial floor fit-out where the client would like that partial space to be LEED certified. The project space is approximately 52% - 60% of the total floor area, but it... |
|
Office space only going for partial renovation.CI-v4 MPR2: Must use reasonable LEED boundariesposted by shashank gangil on May 14, 2021, 8:30 am
We have a client who lease out three floors in a office building in Hong Kong. They are currently renovating a part of these three floors. Total renovated area is approximately 30% of the total... Last reply: Edgar Arevalo, Mar 7, 2024, 12:14 am |
|
Existing PV on previously certified projectNC-v4 EAc5: Renewable energy productionposted by Yu Zhang on Feb 13, 2019, 3:33 pm
I have a project that is a new building located on a previous certified LEED project with PV production. The previous project had >90% offset by energy use and >100% offset by cost from... Last reply: Marcus Sheffer, Mar 6, 2024, 12:20 pm |
|
Location Valuation FactorNC-v4 MRc3: Building product disclosure and optimization - sourcing of raw materialsposted by Shannon Oletic on Jul 15, 2019, 6:01 pm
Hello, Do all components of a product have to comply with the 160km sourcing requirements in order to apply the location valuation factor in v4? For example, if the recycled scrap within... Last reply: Dave Hubka, Mar 6, 2024, 9:34 am |
|
LEED Communities- non-contiguous land includedND-v4 MPR2: Must use reasonable LEED boundariesposted by Lidia Johansen on Mar 5, 2024, 6:21 pmLidia, you're correct there's no LEEDuser forum for Communities despite its official status. I'm unaware of non-contiguous land provisions in Communities, but it may not be a good idea to look toward ND because the two systems were developed very differently. ND doesn't allow non-contiguous land, except for intervening street rights-of-way. For Communities, you may want to check with USGBC staff. Eliot Log in or register to post comments 1 Vote up! Thank you for your response Eliot Log in or register to post comments 0 Vote up! ... Last reply: Lidia Johansen, Mar 6, 2024, 4:21 am |
|
50% surface area reuseCI-v4.1 MRc2: Interiors life-cycle impact reductionposted by Mark Ragucci on Jan 15, 2020, 9:40 am
how is this credit calculated? can in include existing floor slab and deck? we are leaving a portion of the exiting walls that are about 20ft tall and our ceilings will be at 9'. can i calculate... Last reply: Stephani Carter, Mar 5, 2024, 7:34 pm |
