Hello all:
Does anybody have an experience with following:

If a classroom is of an irregular shape – lets say has an entrance nook / foyer 8 feet wide by 6 feet deep ( and it is not...

Ok, so we all know that vehicles can't be LEED certified; however, ACEEE offers a very useful spreadsheet for all cars that meet the LEED standard for this credit. You can find it here:

...

According to Ashrae 90.1-2007 art 5.4.1 where insulation is required in sections 5.5 or 5.6 it shall comply with 5.8.1.1-5.8.1.9. What is not clear to me is if you have to comply with the...

From the wording in the reference guide, I had understood that the ventilation requirements of printer rooms are not relevant in CS where these are part of the tenant fit-out (CS guidance, page...

I have two questions.

1. Does LEED accept e-mail communications (to and from client, contractor, design team etc.) as valid documentary proof for various credits?

2. Does LEED has a...

We have a 2 m. high brick wall running all around out site. This wall belongs to the property so it is within the site boundary and the site boundary runs exactly along the outside surface of the...

we are working on a mixed use tower (80% residential and 20% office)and we applied to...

We have a new build out of a small office in an existing industrial building. We will be adding new package roof top units with DX cooling and gas heat to condition the office space. We are...

Hi Ryan - I'm not sure I understand your question. The performance period is basically defined by the timing of your submittal. If you submit documentation, your PP effectively ends at that time...

we install a low flow device into our blow out fixture and a external testing show the installed device capable to save 20% water once it been installed. we excited about it, and make the...