Log in
LEED Pilot Credits
LEED Pilot Credit Library
Energy-Related Pilot Credits
Community contaminant prevention - airborne releases

LEED CREDIT

Pilot-Credits EApc66: Community contaminant prevention - airborne releases 1 point

LEEDuser’s viewpoint

Frank advice from LEED experts

LEED is changing all the time, and every project is unique. Even seasoned professionals can miss a critical detail and lose a credit or even a prerequisite at the last minute. Our expert advice guides our LEEDuser Premium members and saves you valuable time.

Credit language

USGBC logo

© Copyright U.S. Green Building Council, Inc. All rights reserved.

Requirements

Meet California South Coast Air Quality Management District standards for all products of combustion. Do not exceed the emission limits below for products of combustion, as outlined in the following California South Coast Air Quality Management District Rules:

  • (Amended February 1, 2008), Emissions from Gaseous- and Liquid-Fueled Internal Combustion Engines
  • 1111 (Amended July 8, 1983), NOx Emissions from Natural-Gas-Fired, FanType Central Furnaces
  • 1121 (Amended September 3, 2004) Control of Nitrogen Oxides from Residential Type, Natural Gas-Fired Water Heaters
  • 1146 (Amended November 17, 2000), Emissions of Oxides of Nitrogen from Industrial, Institutional, and Commercial Boilers, Steam Generators, and Process Heaters
  • 1146.1 (Amended May 13, 1994), Emissions of Oxides of Nitrogen from Small Industrial, Institutional, and Commercial Boilers, Steam Generators, and Process Heaters
  • 1146.2 (Amended May 5, 2006), Emissions of Oxides of Nitrogen from Large Water Heaters and Small Boilers and Process Heaters

Equipment Types

Oxides of Nitrogen (NOx)

Volatile Organic Compounds (VOCs)

Carbon Monoxide (CO)

Gaseous and Liquid-Fueled Stationary Engines – Emergency or Standby Power Uses

11ppm1

30ppm1,2

70ppm1

Gaseous and Liquid-Fueled Stationary Engines –
Non-Emergency and Non-Standby Power Uses5

0.070 lbs/MW-hr3

0.10 lbs/MW-hr4

0.20 lbs/MW-hr3

Landfill and Digestor Gas-Fired Stationary Engines

bhp>500: ppm = 36 x ECF1,6

Landfill Gas: 401,2
Digestor Gas: 250 x ECF1,2,6

2,000 ppm1

Natural-Gas-Fired, Fan-Type Central Furnaces (heating only with input rate less than 175,000 BTUH, or heating and cooling with cooling rate of less than 65,000 BTUH)

40 nanograms (calculated as NO2) per joule of useful heat delivered to the heated space

 

 

Residential Type, Natural Gas-Fired Water Heaters

15 ppm7 or 10 nanograms (calculated as NO2) per joule of heat output

 

 

Boilers, Steam Generators, Water Heaters, and Process Heaters
(rated heat input capacity less than or equal to 400,000 BTU per hour)

55 ppm7 or 40 nanograms (calculated as NO2) per joule of heat output

 

 

Boilers, Steam Generators, Water Heaters and Process Heaters rated heat input capacity greater than 400,000 BTU per hour and less than or equal to 2,000,000 BTU per hour)

20 ppm7 or 40 nanograms (calculated as NO2) per joule of heat output

 

400 ppm

Boilers, Steam Generators, Water Heaters, and Process Heaters
(rated heat input capacity greater than 2,000,000 BTU per hour and less than 5,000,000 BTU per hour)

30 ppm7 or 0.037 pounds per million BTU of heat input

 

400 ppm7

Boilers, Steam Generators, Water Heaters, and Process Heaters
(rated heat input capacity greater than or equal to 5,000,000 BTU per hour)8,9

30 ppm7 or 0.036 pounds per million BTU of heat input

 

400 ppm7

Notes:

  1. Parts per million by volume, corrected to 15% oxygen on a dry basis and averaged over 15 minutes.
  2. Measured as carbon.
  3. The averaging time of the emission standards is 15 minutes.
  4. Mass emissions of VOC shall be calculated using a ratio of 16.04 pounds of VOC per lb-mole of carbon.
  5. Emissions limits shall be subject to adjustment for engines that produce combined heat and electrical power (see Rule 1110.2)
  6. ECF is the efficiency correction factor.
  7. Parts per million by volume, corrected to 3% oxygen on a dry basis.
  8. Capacity Factor greater than 25%.
  9. Units with a heat input capacity greater than 40 million BTU per hour and an annual heat input greater than 200 x 109 BTU per year shall have a continuous in-stack nitrogen oxides monitor or equivalent verification system in compliance with 40 CFR part 60 Appendix B Specification 2.
For engines of 1,000 bhp and greater, install, operate and maintain in calibration a NOX Continuous Emission Monitoring System (CEMS) with data gathering and retrieval capability. Projects that do not contain combustion equipment are not eligible for this credit.

General Pilot Documentation Requirements

Register for the pilot credit Credits 1-14 Credits 15-27 Credits 28-42 Credits 43-56 Credits 57-67 Credits 68-82 Credits 83--96
Credit Specific
Complete the v2009 Healthcare sample form.
Changes
  • 10/9/2019 - clarified documentation requirement
See all forum discussions about this credit »

What does it cost?

Cost estimates for this credit

On each BD+C v4 credit, LEEDuser offers the wisdom of a team of architects, engineers, cost estimators, and LEED experts with hundreds of LEED projects between then. They analyzed the sustainable design strategies associated with each LEED credit, but also to assign actual costs to those strategies.

Our tab contains overall cost guidance, notes on what “soft costs” to expect, and a strategy-by-strategy breakdown of what to consider and what it might cost, in percentage premiums, actual costs, or both.

This information is also available in a full PDF download in The Cost of LEED v4 report.

Learn more about The Cost of LEED v4 »

Documentation toolkit

The motherlode of cheat sheets

LEEDuser’s Documentation Toolkit is loaded with calculators to help assess credit compliance, tracking spreadsheets for materials, sample templates to help guide your narratives and LEED Online submissions, and examples of actual submissions from certified LEED projects for you to check your work against. To get your plaque, start with the right toolkit.

Get the inside scoop

Our editors have written a detailed analysis of nearly every LEED credit, and LEEDuser premium members get full access. We’ll tell you whether the credit is easy to accomplish or better left alone, and we provide insider tips on how to document it successfully.

USGBC logo

© Copyright U.S. Green Building Council, Inc. All rights reserved.

Requirements

Meet California South Coast Air Quality Management District standards for all products of combustion. Do not exceed the emission limits below for products of combustion, as outlined in the following California South Coast Air Quality Management District Rules:

  • (Amended February 1, 2008), Emissions from Gaseous- and Liquid-Fueled Internal Combustion Engines
  • 1111 (Amended July 8, 1983), NOx Emissions from Natural-Gas-Fired, FanType Central Furnaces
  • 1121 (Amended September 3, 2004) Control of Nitrogen Oxides from Residential Type, Natural Gas-Fired Water Heaters
  • 1146 (Amended November 17, 2000), Emissions of Oxides of Nitrogen from Industrial, Institutional, and Commercial Boilers, Steam Generators, and Process Heaters
  • 1146.1 (Amended May 13, 1994), Emissions of Oxides of Nitrogen from Small Industrial, Institutional, and Commercial Boilers, Steam Generators, and Process Heaters
  • 1146.2 (Amended May 5, 2006), Emissions of Oxides of Nitrogen from Large Water Heaters and Small Boilers and Process Heaters

Equipment Types

Oxides of Nitrogen (NOx)

Volatile Organic Compounds (VOCs)

Carbon Monoxide (CO)

Gaseous and Liquid-Fueled Stationary Engines – Emergency or Standby Power Uses

11ppm1

30ppm1,2

70ppm1

Gaseous and Liquid-Fueled Stationary Engines –
Non-Emergency and Non-Standby Power Uses5

0.070 lbs/MW-hr3

0.10 lbs/MW-hr4

0.20 lbs/MW-hr3

Landfill and Digestor Gas-Fired Stationary Engines

bhp>500: ppm = 36 x ECF1,6

Landfill Gas: 401,2
Digestor Gas: 250 x ECF1,2,6

2,000 ppm1

Natural-Gas-Fired, Fan-Type Central Furnaces (heating only with input rate less than 175,000 BTUH, or heating and cooling with cooling rate of less than 65,000 BTUH)

40 nanograms (calculated as NO2) per joule of useful heat delivered to the heated space

 

 

Residential Type, Natural Gas-Fired Water Heaters

15 ppm7 or 10 nanograms (calculated as NO2) per joule of heat output

 

 

Boilers, Steam Generators, Water Heaters, and Process Heaters
(rated heat input capacity less than or equal to 400,000 BTU per hour)

55 ppm7 or 40 nanograms (calculated as NO2) per joule of heat output

 

 

Boilers, Steam Generators, Water Heaters and Process Heaters rated heat input capacity greater than 400,000 BTU per hour and less than or equal to 2,000,000 BTU per hour)

20 ppm7 or 40 nanograms (calculated as NO2) per joule of heat output

 

400 ppm

Boilers, Steam Generators, Water Heaters, and Process Heaters
(rated heat input capacity greater than 2,000,000 BTU per hour and less than 5,000,000 BTU per hour)

30 ppm7 or 0.037 pounds per million BTU of heat input

 

400 ppm7

Boilers, Steam Generators, Water Heaters, and Process Heaters
(rated heat input capacity greater than or equal to 5,000,000 BTU per hour)8,9

30 ppm7 or 0.036 pounds per million BTU of heat input

 

400 ppm7

Notes:

  1. Parts per million by volume, corrected to 15% oxygen on a dry basis and averaged over 15 minutes.
  2. Measured as carbon.
  3. The averaging time of the emission standards is 15 minutes.
  4. Mass emissions of VOC shall be calculated using a ratio of 16.04 pounds of VOC per lb-mole of carbon.
  5. Emissions limits shall be subject to adjustment for engines that produce combined heat and electrical power (see Rule 1110.2)
  6. ECF is the efficiency correction factor.
  7. Parts per million by volume, corrected to 3% oxygen on a dry basis.
  8. Capacity Factor greater than 25%.
  9. Units with a heat input capacity greater than 40 million BTU per hour and an annual heat input greater than 200 x 109 BTU per year shall have a continuous in-stack nitrogen oxides monitor or equivalent verification system in compliance with 40 CFR part 60 Appendix B Specification 2.
For engines of 1,000 bhp and greater, install, operate and maintain in calibration a NOX Continuous Emission Monitoring System (CEMS) with data gathering and retrieval capability. Projects that do not contain combustion equipment are not eligible for this credit.

General Pilot Documentation Requirements

Register for the pilot credit Credits 1-14 Credits 15-27 Credits 28-42 Credits 43-56 Credits 57-67 Credits 68-82 Credits 83--96
Credit Specific
Complete the v2009 Healthcare sample form.
Changes
  • 10/9/2019 - clarified documentation requirement

In the end, LEED is all about documentation. LEEDuser’s Documentation Toolkit, for premium members only, saves you time and helps you avoid mistakes with:

  • Calculators to help assess credit compliance.
  • Tracking spreadsheets for materials purchases.
  • Spreadsheets and forms to give to subs and other team members.
  • Guidance documents on arcane LEED issues.
  • Sample templates to help guide your narratives and LEED Online submissions.
  • Examples of actual submissions from certified LEED projects.
See all LEEDuser forum discussions about this credit » Subscribe to new discussions about Pilot-Credits EApc66