Log in
LEED v4.1
Hospitality – NC
Materials and Resources
Construction and Demolition Waste Management Planning

LEED CREDIT

Hospitality-NC-v4.1 MRp2: Construction and demolition waste management planning Required

See all forum discussions about this credit »
View the LEED v4 version of this credit »

SPECIAL REPORT

LEEDuser expert

Tiffany Beffel

LEED AP BD+C, LEED AP HOMES, CDT, CSBA, Assoc. AIA

Innovative Workshop Consulting
Managing Partner

SPECIAL REPORT

LEEDuser’s viewpoint

Frank advice from LEED experts

LEED is changing all the time, and every project is unique. Even seasoned professionals can miss a critical detail and lose a credit or even a prerequisite at the last minute. Our expert advice guides our LEEDuser Premium members and saves you valuable time.

Credit language

USGBC logo

© Copyright U.S. Green Building Council, Inc. All rights reserved.

Intent

To reduce construction and demolition waste disposed of in landfills and incineration facilities by recovering, reusing, and recycling materials.

Requirements

Develop and implement a construction and demolition waste management plan:

  • Establish waste diversion goals for the project by identifying at least five materials (both structural and nonstructural) targeted for diversion.
  • Specify whether materials will be separated or comingled and describe the diversion strategies planned for the project. Describe where the material will be taken and how the recycling facility will process the material including expected diversion rates for each material stream.
Provide a final report detailing all major waste streams generated, including disposal and diversion rates. Alternative daily cover (ADC) does not qualify as material diverted from disposal. Include materials destined for ADC in the calculations as waste. Land-clearing debris is not considered construction, demolition, or renovation waste that can contribute to waste diversion. See all forum discussions about this credit »

What does it cost?

Cost estimates for this credit

On each BD+C v4 credit, LEEDuser offers the wisdom of a team of architects, engineers, cost estimators, and LEED experts with hundreds of LEED projects between then. They analyzed the sustainable design strategies associated with each LEED credit, but also to assign actual costs to those strategies.

Our tab contains overall cost guidance, notes on what “soft costs” to expect, and a strategy-by-strategy breakdown of what to consider and what it might cost, in percentage premiums, actual costs, or both.

This information is also available in a full PDF download in The Cost of LEED v4 report.

Learn more about The Cost of LEED v4 »

Addenda

11/8/2019Updated: 11/8/2019
Form Update
Description of change:
C&D Waste calculator published
Campus Applicable
No
Internationally Applicable:
Yes
7/25/2019Updated: 7/30/2019
Reference Guide Correction
Description of change:
Edit the fourth paragraph under "Commingled, source separated and counting materials streams" section to read as follows:

"All recycling facilities must be regulated by a local or state authority. Note that regulatory authorities often do not regulate recycling rates of facilities. To determine the mixed waste processing facility recycling rate, projects must use an average diversion rate for the facility that generally corresponds to the time materials were generated on the project and sent to the facility. The average recycling rate for the facility must exclude ADC. Mixed recyclable materials that are processed mechanically over the same recycling line are counted as one “stream” in LEED, even if the processing facility separates the output into multiple materials for recovery after processing."
Campus Applicable
No
Internationally Applicable:
Yes
See all forum discussions about this credit »

Documentation toolkit

The motherlode of cheat sheets

LEEDuser’s Documentation Toolkit is loaded with calculators to help assess credit compliance, tracking spreadsheets for materials, sample templates to help guide your narratives and LEED Online submissions, and examples of actual submissions from certified LEED projects for you to check your work against. To get your plaque, start with the right toolkit.

LEEDuser expert

Tiffany Beffel

LEED AP BD+C, LEED AP HOMES, CDT, CSBA, Assoc. AIA

Innovative Workshop Consulting
Managing Partner

Get the inside scoop

Our editors have written a detailed analysis of nearly every LEED credit, and LEEDuser premium members get full access. We’ll tell you whether the credit is easy to accomplish or better left alone, and we provide insider tips on how to document it successfully.

USGBC logo

© Copyright U.S. Green Building Council, Inc. All rights reserved.

Intent

To reduce construction and demolition waste disposed of in landfills and incineration facilities by recovering, reusing, and recycling materials.

Requirements

Develop and implement a construction and demolition waste management plan:

  • Establish waste diversion goals for the project by identifying at least five materials (both structural and nonstructural) targeted for diversion.
  • Specify whether materials will be separated or comingled and describe the diversion strategies planned for the project. Describe where the material will be taken and how the recycling facility will process the material including expected diversion rates for each material stream.
Provide a final report detailing all major waste streams generated, including disposal and diversion rates. Alternative daily cover (ADC) does not qualify as material diverted from disposal. Include materials destined for ADC in the calculations as waste. Land-clearing debris is not considered construction, demolition, or renovation waste that can contribute to waste diversion.

LEEDuser expert

Tiffany Beffel

LEED AP BD+C, LEED AP HOMES, CDT, CSBA, Assoc. AIA

Innovative Workshop Consulting
Managing Partner

See all LEEDuser forum discussions about this credit » Subscribe to new discussions about Hospitality-NC-v4.1 MRp2